Golden shell
-
New or used HS5 miner
Gold Shell HS5 is a professional ASIC mining machine that supports HNS and SC mining, and is an upgraded version of HS3. If you are interested in HNS or SC mining, it is very necessary to read this article carefully.
1. The appearance of the unpacked HS5 is the same as that of the HS3-SE. It adopts the integrated design of mining machine + power supply. The measured measurement is 290*280.187mm, which is the same as the official data. The weight of the bare machine is 8.5kg.
The mining machine has four built-in computing power boards, and four fans are equipped with active air supply + active ventilation for heat dissipation, which is not much different from the standard ASIC mining machine.
The interface of Jinbei HS5 mining machine control board is IP report button, Ethernet interface, TF card slot, remake button and status indicator, which is more convenient for miners to get started.
The official nominal parameters are:
Plug in the power supply and network cable to start work, connect the network cable to the Lan port, enter the router background to find the IP address of the miner, and then enter the IP address found in the browser to enter the control page of the miner. The default interface is English. There is a small flag in the upper right corner of the control page. Click to switch the language.
To change the miner parameters, click the “unlock” button in the upper right corner and enter the default password “123456789″ to modify the miner. After unlocking, you can modify the mining pool for mining, enter the “Mining Machine Settings” page, and add the HNS mining pool information of the mining pool. After the addition is completed, the mining machine will automatically start the mining process. As an upgraded version of HS3, Jinbei HS5 has a relatively large improvement in computing power. The nominal computing power is 2700G, and the actual computing power is 2800G when it runs for 8 minutes, and the overall computing power has increased by about 35%.
During operation, we measured the noise of the HS5 at a close distance (measured close to the mining machine) at about 91dB, which is louder. However, because the HS5 is designed for the mining environment, the overall impact is not large. -
New or used LT5pro miner
The power consumption of the t5proLT5 PRO model is 3100W and up to 2455M after the upgrade, while the old version of Lt5 has only 2.05G of computing power, which is 2050M and power consumption of 2080w. If you only look at the power consumption of computing power, the old version of Lt5 is often the best choice. Of course, as one of the most popular mining machine manufacturers this year, Jinbei, as a businessman, tends to maximize profits. As soon as the lt5 futures are released, the upgraded version of the lt5pro will be released immediately. Although the computing power of lt5pro can not reach a position of Ant L7, it is also a big improvement, which is equivalent to directly increasing the computing power of an Ant L3+. Of course, after the computing power increases, the power consumption also increases up to 3100w , this comparison is much inferior to the old version of the machine Lt5, but the advantage of this machine lies in its high cost performance, although the power consumption increases, its price is not much different from the old version of the lt5pro, of course, the miners who mine LTC are mainly for Doge proceeds.
-
New or used HS-BOX miner
HS Lite is made by Goldshell and its mining 2 algorithm (Handshake, Blake2B-Sia) runs at a maximum hash rate of 2900Gh/s and consumes only 700W
-
New or used CK-BOX miner
Jinbei CK-BOX is a CKB dedicated ASIC home mining machine developed based on Eaglesong algorithm. This model has a nominal computing power of 1050G and a power consumption of 215W. The calculated power consumption ratio is as low as 0.2W/G.
K-BOX Miner Settings]
After the miner is plugged in the power supply and network cable, turn on the power button to start work, connect the network cable to the Lan port, enter the router background to find the IP address of the miner, and then open the computer browser (It is recommended to use the browser with Chrome kernel, other browsers It may display abnormally) Enter the found IP address to enter the mining machine control page. The default interface is English. There is a small flag in the upper right corner of the control page. Click to switch the language. -
New or used KD5 miner
Why do everyone say that Jinbei KD5 is the machine of choice for big miners, there are the following points:
1. Jinbei KD5 is not only small in size, saves space, and is easy to place in the mine, and it is a silent model. It is not burdensome to dig a few at home.
2. The operating computing power is stable and the maintenance rate is low, saving time and effort without excessive care.
3. With the support of a potential currency such as KDA, the income is stable and guaranteed.
4. It is the current KDA model with the highest single-computer computing power, with superior power consumption ratio and fast return cycle.
-
New or used KD-box pro miner
Jinbei KD-BOXpro is a new shocking launch, with a computing power of 2.6T, a power consumption of 230w, and a computing power upgrade of 1T. Home-type mining artifact, low noise, stable computing power, and stable system operation. It is easy to carry, easy to use at home, and can also be carried to the office with you. You can dig anytime, anywhere. The income is stable and the price is very high.
